ANSELL 37-176-10 Sol-Vex,Nitrile,Grn,22 mil,13" Gloves
Estimated Price: PhP 0.00
Availability: In Stock
Est. Delivery:
Add to cart
Protective garments that are worn over the hands against cuts and abrasions, chemicals, cold, heat and most work environments; could be of disposable kind
Nitrile Rubber
Accompanying Products
Governing Standards
Must Satisfy the following standards
•CEN EN 374-2:2003 - Determinantion of Resistance to Penetration
•CEN EN 374-3:2003/AC:2006 - Determination of Resistance to                                                                  Permeation By Chemicals
•CEN EN 388:2003 - Protective Gloves Againts Mechanical Risks
•CEN EN 421:1994 - Protective Gloves Againts Ionising Radiation &                                          Radioactive Contaminantion
•BS EN 374 Parts 1 to 3:2003 - Protective gloves againts chemicals and                                                     micro-organisms
•Part 2: Detremine of Resistance to penetartion
•Part 3: Deternination of resistance to permeation by chemicals
Industry, Work Areas & Operations Allocated to
Critical Environment
First Responder/Defense
Other Occupation
Aircraft Assembly
automotive Manufacturing
Chemical Plants/Laboratory
Pesticide Manufacturing and Plants Maintenance
Quality Criteria
In the EN 374 Standard, Part 1 details the performance criteria and also includes requirements to check the mechanical and physical integrity of the products.
Penetration resistance in part 2 is determined by subjecting the gloves to either air leak or water leak tests to determine if any holes are present which would allow chemicals to penetrate through to the users hand.
Part 3 specifies the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the conditions of continuous contact. Permeation is the process by which a chemical moves through a protective glove material on a molecular level. Gloves are classified according to the breakthrough time of the chemical through the glove material.
Quality Check Method
In Part 2: Determination of resistance to penetration, two tests are included, both to assess the resistance of the glove to penetration (or freedom from holes). First is the air leak test which involves inflating a glove with air pressure and then submerging it in a tank of water. Any leaks are identified by visible bubbles. The second test involves suspending a glove filled with water and examining its outer surface for water droplets.
In Part 3:Determination of resistance to permeation by chemicals, a sample of the glove material is placed in contact with a challenge chemical and the rate at which this chemical travels through (permeates) the material is determined. The breakthrough time is the time at which this permeation rate exceeds 1µg/cm2/min. The samples are assigned performance levels depending on this breakthrough time. In order to be certified as chemically protective, the gloves must achieve a minimum of level 2 (breakthrough time of greater than 30 minutes) against at least 3 chemicals listed in EN 374-1.
Quality Tolerance
This pictogram is displayed on gloves that comply to penetration and permeation requirements. Gloves that carry this symbol have been successfully tested against at least 3 different chemicals. The pictogram is accompanied by the relevant code letter(s) of these chemicals according to the following chart:
Code letter
Primary alcohol
Nitrile compound
Chlorinated paraffin
Sulphur containing organic compound
Aromatic hydrocarbon
Heterocyclic and ether compound
Saturated hydrocarbon
Inorganic base
Inorganic mineral acid
Depending on the workplace, the gloves are exposed both to the influence of body temperature and of the ambient temperature, i.e. they can be exposed to temperatures higher or lower than (33 ± 1) °C, which, in turn, can result in other breakthrough times.
This pictogram is displayed on gloves that are waterproof and give low chemical protection.
People/Quality Check Skills Required
Consult a qualfied professional in the specific industry that the Chemical Resistant Gloves will be used(OSH Experts) taking in strict consideration and compliance the standards and requirements stated herein.
Likewise,compliance to the standards should be reflected in the presence or absence of the pictograms above as seals of compliance.
Type name is accordinf to the main material which the glove is made of,hence,the major types of chemical resistant gloves are: natural rubber,neoprene rubber,butyl rubber,polyvinyl and nitrile rubber.